Table of Contents
Advertisement
User set mode
■
The User set mode allows you to set seldom-changed set-
tings and "customize" the transceiver operation to suit your
preferences and operating style.
Entering the User set mode:
q Hold down [SET] for 1 second to enter the User set
mode.
w Push [SET] several times to select the appropriate item.
Then push [CH Up] or [CH Down] to set the desired level
or option.
• In the User set mode, the selectable items are preset by your
dealer. The presetable items are Backlight, LCD contrast,
Beep, Beep Level, Ringer Level, SQL Level, AF Min Level,
Mic Gain, VOX Gain*, VOX Delay*, Battery Voltage, Signal
Moni, Lone Worker and System Info.
* Appears only when the external VOX unit is connected.
e Hold down [SET] for 1 second again to exit the User set
mode.
Scrambler function
■
The voice scrambler function provides private communica-
tion between stations. All transceiver versions have a built-in
frequency inversion type scrambler.
➥ Push [Scrambler] to toggle the scrambler function ON or
OFF.
• "
" (Scrambler icon) appears when the function is ON.
Stun function
■
The dispatcher can send a signal that will stun, kill or revive
your transceiver.
When a Stun command is received, the transceiver becomes
unusable. In that case, receiving a Revive command or input-
ting the password* (p. 13) is necessary to operate the trans-
ceiver again.
When a Kill command is received, the transceiver becomes
unusable (the transceiver switches to the cloning required
condition). In that case, cloning the transceiver is necessary
to operate the transceiver again.
* Depending on the pre-programmed settings.
See the operating guide for details of the Stun function
with the BIIS and dPMR system operations. Ask your deal-
er for details.
3
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
18
Advertisement
Table of Contents
