Oemse Commands; Group Maps - Fujitsu PRIMERGY BX600 Reference Manual

5. OEMSE Commands

5. OEMSE Commands
This chapter describes the OEMSE commands (verbs) for BladeEngine Software that are
provided by the CLI. The commands has to be run in the particular group (smclp-target).
To go the particular group use 'cd' command. CLI allows to execute the OEMSE command
from any other group, provide the context (smclp-target) is given as an input to the
command (as shown in the syntax of the OEMSE commands). The group (smclp-target)
map tree is shown in the

5.1. Group Maps

The following tree represents the SM-CLP targets, properties and verbs with their
associations to each other.
Convention Meaning
* Property
! OEMSECommand
[< n > - < m >] Multi-instance group starting with 'n'-th instance and with max of 'm' instances
(< parameter >) Mandatory parameter to the action
([< parameter >]) Optional parameter to the action
ROOT
|-> BladeEngine[0-7]
| |-> *Manufacturer (Read-Only)
| |-> *ModelNumber (Read-Only)
| |-> *Description (Read-Only)
| |-> *SerialNumber (Read-Only)
| |-> *ActiveFirmwareVersion (Read-Only)
| |-> *FirmwareVersionOnFlash (Read-Only)
| |-> *BIOSVersion (Read-Only)
| |-> *BootCodeVersion (Read-Only)
| |-> *FirmwareStatus (Read-Only)
| |-> *iSCSIVersionMin (Read-Only)
| |-> *iSCSIVersionMax (Read-Only)
| |-> *MaxCDBLength (Read-Only)
| |-> *MaxMTUSize (Read-Only)
| |-> *LDTO (Read-Only)
| |-> *DefaultETO (Read-Only)
| |-> *VLDCapable (Read-Only)
| |-> *VLDEnabled
| |-> !OEMSEEraseConfiguration ( )
| |-> !OEMSEUpgradeFlashROM ( UFIFileName )
|-> LogicalHBA[0-31]
|-> !OEMSEEnableNIC ( PhysicalHBANumber )
|-> !OEMSEEnableiSCSI ( PhysicalHBANumber )
|-> !OEMSEDisableNIC ( PhysicalHBANumber )
|-> !OEMSEDisableiSCSI ( PhysicalHBANumber )
|-> NIC
| |-> PhysicalHBA[0-7]
| |->
| |
| |
| |
| |
| |
| |
| |
| |->
| |
| |
Group Maps chapter.
PCI
|-> *VendorID (Read-Only)
|-> *DeviceID (Read-Only)
|-> *SubsysDeviceID (Read-Only)
|-> *SubsysVendorID (Read-Only)
|-> *BusNumber (Read-Only)
|->
*DeviceNumber (Read-Only)
|-> *FunctionNumber (Read-Only)
Driver
|-> *DriverName (Read-Only)
|-> *DriverVersion (Read-Only)
5.1. Group Maps
27