Oemseeraseconfiguration - Fujitsu PRIMERGY BX600 Reference Manual

5. OEMSE Commands
| |->
| |->
| |->
| |->
)
| |->
| |->
|-> !OEMSEAddTarget ( TargetName IPAddress PortNumber )
|-> !OEMSEDeleteTarget ( InstanceNumber )

5.2. OEMSEEraseConfiguration

Command
OEMSEEraseConfiguration
Description
This command resets the BladeEngine configuration to factory default settings. Upon
successful completion of this command, all user configured settings are lost. No reboot is
required for these changes to take effect.
Syntax
OEMSEEraseConfiguration [common_options] [SM-CLP-target]
Options
[common_options]
Parameter Description
SM-CLP- Optional input that indicates the SM-CLP target group for the given command. This
target overrides the current group. ".." indcates parent group. "/" indicates root group.
Required Parameters
None
Optional Parameters
None
Possible Error Messages
Common Error Messages
Active session(s) present. Please log out of all sessions before clearing configuration.
For systems booting from an iSCSI target, configuration can only be cleared using the
iSCSI Select Utility.,
*SLPEnabled
*iSNSEnabled
*DefaultInitiatorPort
!OEMSEAddSendTargetPortal ( IPAddress PortNumber [PortIdentifier]
!OEMSEDeleteSendTargetPortal ( InstanceNumber )
!OEMSERefreshAvailableTargets ( )
5.2. OEMSEEraseConfiguration
32