Oemsescsiwrite - Fujitsu PRIMERGY BX600 Reference Manual

5. OEMSE Commands

5.22. OEMSESCSIWrite

Command
OEMSESCSIWrite
Description
This command enables protocol validation by issuing SCSI WRITE commands to the LUN
(device).
Syntax
OEMSESCSIWrite [common_options] -OEMSEparams StartBlockAddress="< value
>",Count="< value >" [SM-CLP-target]
Options
[common_options]
Parameter Description
Optional input that indicates the SM-CLP target group for the given command. This
SM-CLP-target
overrides the current group. ".." indcates parent group. "/" indicates root group.
- takes in additional parameters as arguments as listed below in the Parameters table
OEMSEParams of this section. The parameters has to be entered in a key=value format.
Required Parameters
Data
Parameter Name
Type
StartBlockAddress integer
Count integer
Optional Parameters
None
Possible Error Messages
Common Error Messages
Min Max Default
0 65535 0
1 65535 1
5.22. OEMSESCSIWrite
Description
This parameter indicates the first block
address from where to begin the SCSI
Read/Write.
This parameter accepts count of number of
blocks to be transferred to the device.
52