5. OEMSE Commands
5.24. OEMSELogin
Command
OEMSELogin
Description
This action allows the initiator to login to a target with its current set of login parameters.
This action takes the following parameters: IP Address of the portal, Port number of the
portal, Instance number of the controller (Physical HBA), and finally the instance number
of the port (Logical HBA). The last 2 parameters can be defaulted to the value of the
'DefaultIntrPort' property, which tells what initiator port number to use. The first 2
parameters can be defaulted to the value of the 'DefaultLoginPortal', which tells which
portal under the Target will be logged into.
Syntax
OEMSELogin [common_options] [-OEMSEparams] [IPAddress="< value
>"],[PortNumber="< value >"],[PhysicalHBAInstanceNumber="< value
>"],[LogicalHBAInstanceNumber="< value >"],[SessionInitiatorName="< value >"] [SM-
CLP-target]
Options
[common_options]
Parameter
Description
Optional input that indicates the SM-CLP target group for the given command. This
SM-CLP-target
overrides the current group. ".." indcates parent group. "/" indicates root group.
-
takes in additional parameters as arguments as listed below in the Parameters table
OEMSEParams
of this section. The parameters has to be entered in a key=value format.
Required Parameters
None
Optional Parameters
Parameter Name
IPAddress
PortNumber
PhysicalHBAInstanceNumber
LogicalHBAInstanceNumber
SessionInitiatorName
Possible Error Messages
Data
Min
Max
Type
ipaddress
0
0
integer
1024
65535
integer
0
255
integer
0
1
string
1
224
5.24. OEMSELogin
Default
Description
The IP address of the target
0.0.0.0
portal to login.
The Port number of the target to
1024
login.
A string input that gives the
0
BladeEngine controller instance
number.
A string input that gives the
logical HBA instance number.
0
Note that each port of the
controller is mapped to one
logical HBA.
The initiator iSCSI Name for the
iqn.se
session to login.
54