Oemsesaveconfig - Fujitsu PRIMERGY BX600 Reference Manual

4. Basic Commands

4.6. OEMSESaveConfig

Command
OEMSESaveConfig
Description
This command saves the BladeEngine controller configuration to the given file name as an
SM-CLP script. The SM-CLP script can be used to restore the BladeEngine controller
configuration using the ServerEngines client application. Execute the client utility with the -
f option. It is important to note that CHAP secrets will be stored in clear text in the SM-CLP
script file. Hence, adequate precautions must be taken to protect this information when
storing and using the script file. Also note that the SM-CLP script cannot be used to enable
DHCP as a reboot is required when enabled DHCP via SM-CLP. Therefore enable DHCP
using iSCSISelect or SM-CLP prior to executing the script.
Syntax
OEMSESaveConfig [common_options] -OEMSEparams File="< value >"
Options
[common_options]
Parameter Description
- takes in additional parameters as arguments as listed below in the Parameters table
OEMSEparams of this section. The parameters has to be entered in a key=value format.
Required Parameters
Parameter Data
Name Type
File String
Optional Parameters
None
Possible Error Messages
Common Error Messages
Min Max Default Description
string input that contains the filename with fully
N/A N/A N/A
qualified path where the configuration will be saved.
4.6. OEMSESaveConfig
23