Initialr2T; Immediatedata; Initiatorchapname - Fujitsu PRIMERGY BX600 Reference Manual

6. Appendix

6.2.195. InitialR2T

String
InitialR2T
Identifier
The valid values for this property are Yes or No. If set to Yes, the initiator has to wait
Property
for the target to solicit SCSI data before sending it. Setting it to No allows the initiator
Description
to send a burst of FirstBurstLength bytes unsolicited. The default is Yes.
Attributes Read-Write
0
min Value
max Value 3
default Value Yes
Parent
SendTargetPortalLoginOptions
GroupName

6.2.196. ImmediateData

String Identifier ImmediateData
Property This property allows the initiator to append unsolicited data to a command. The
valid values are Yes or No. The default is No.
Description
Attributes Read-Write
min Value 0
max Value 3
default Value Yes
Parent
SendTargetPortalLoginOptions
GroupName

6.2.197. InitiatorCHAPName

String
InitiatorCHAPName
Identifier
This property is an iSCSI authentication login parameter sent to the target. This
parameter is optional and only required for Mutual CHAP authentication. Some
Property
implementations refer to this as a Username. Use the set command with this property
Description
to specify the InitiatorCHAPName. The InitiatorCHAPName can be any name or
sequence of numbers.
Attributes Read-Write
min Value 1
256
max Value
default Value
Parent
Authentication
GroupName
Table 246: InitialR2T
Table 247: ImmediateData
Table 248: InitiatorCHAPName
6.2. MILI_Properties
155