Oemseupgradeflashrom - Fujitsu PRIMERGY BX600 Reference Manual

5. OEMSE Commands

5.3. OEMSEUpgradeFlashROM

Command
OEMSEUpgradeFlashROM
Description
This command updates the BladeEngine firmware version stored in non-volatile memory.
You must restart the system for the updated firmware to become the active firmware
version on the BladeEngine controller. Example: OEMSEUpgradeFlashROM -OEMSEparams
UFIFileName="flash.ufi"
Syntax
OEMSEUpgradeFlashROM [common_options] -OEMSEparams UFIFileName="< value >"
[SM-CLP-target]
Options
[common_options]
Parameter Description
Optional input that indicates the SM-CLP target group for the given command. This
SM-CLP-target
overrides the current group. ".." indcates parent group. "/" indicates root group.
- takes in additional parameters as arguments as listed below in the Parameters table
OEMSEParams of this section. The parameters has to be entered in a key=value format.
Required Parameters
Parameter Data
Name Type
UFIFileName string
Optional Parameters
None
Possible Error Messages
Common Error Messages
Cannot open the specified file,
Invalid UFI file format,
BladeEngine firmware has been updated. Please reboot your system for the changes to
take effect.,
Min Max Default Description
The path to the UFI file that will be used to
3 255 3
upgrade the BladeEngine firmware.
5.3. OEMSEUpgradeFlashROM
33