Initiatoralias; Defaultiscsiname; Initialr2T; Immediatedata - Fujitsu PRIMERGY BX600 Reference Manual

6. Appendix

6.2.32. InitiatorAlias

String
InitiatorAlias
Identifier
The initiator alias allows an organization to associate a user-friendly name with the
Property iSCSI Name (IQN or iSCSI Qualified Name) of the Initiator. Use this property to set
Description the desired iSCSI alias for this Initiator using the set command. For example; set
InitiatorAlias="init1".
Attributes Read-Write
0
min Value
max Value 32
default Value se
Parent
InitiatoriSCSIName
GroupName

6.2.33. DefaultiSCSIName

String Identifier
Property Description
Attributes
min Value
max Value
default Value
Parent GroupName

6.2.34. InitialR2T

String
InitialR2T
Identifier
The valid values for this property are Yes or No. If set to Yes, the initiator has to wait
Property
for the target to solicit SCSI data before sending it. Setting it to No allows the initiator
Description
to send a burst of FirstBurstLength bytes unsolicited. The default is Yes.
Attributes Read-Only
min Value 0
max Value 3
default Value Yes
Parent
InitiatorDefaultLoginOptions
GroupName

6.2.35. ImmediateData

ImmediateData
String Identifier
Property This property allows the initiator to append unsolicited data to a command. The
Description valid values are Yes or No. The default is No.
Attributes Read-Only
min Value 0
3
max Value
default Value Yes
Table 83: InitiatorAlias
DefaultiSCSIName
The default iSCSI name (IQN name) specified for the initiator node.
Read-Only
1
224
iqn.2003-07.com.serverengines
InitiatoriSCSIName
Table 84: DefaultiSCSIName
Table 85: InitialR2T
6.2. MILI_Properties
100