Pin Management - ZyXEL Communications LTE3311 series User Manual

Table 16 Network > WAN > IPv6 (continued)
LABEL
IPv6 Address
Range(Start)
IPv6 Address
Range(End)
IPv6 Address Lifetime
Apply
Cancel

6.7 PIN Management

Use this screen to enable PIN authentication and configure the PIN code. Click Network > WAN >
PIN Management from the Configuration menu.
Figure 33 Network > WAN > PIN Management
The following table describes the labels in this screen.
Table 17 Network > WAN > PIN Management
LABEL
PIN Code Request
function
SIM PIN Code
Apply
Cancel
Chapter 6 WAN
DESCRIPTION
If you select Stateful (DHCPv6), specify the range of IPv6 addresses from which
the DHCPv6 server assigns to the clients. Enter the smallest value of the last block of
the IPv6 addresses which are to be allocated.
If you select Stateful (DHCPv6), specify the range of IPv6 addresses from which
the DHCPv6 server assigns to the clients. Enter the largest value of the last block of
the IPv6 addresses which are to be allocated.
If you select Stateful (DHCPv6), specify how long (in minutes) the IPv6 addresses
remain valid.
Click Apply to save your changes back to the LTE3311.
Click Cancel to reload the previous configuration for this screen.
DESCRIPTION
Select Enable to turn on PIN code authentication. A PIN (Personal Identification
Number) code is a key to a SIM card. Without the PIN code, you cannot use the SIM
card.
Select Disable to turn off PIN code authentication.
If you select Enable, enter the 4-digit PIN code (0000 for example) provided by your
ISP for the inserted SIM card.
Click Apply to save your changes back to the LTE3311.
Click Cancel to reload the previous configuration for this screen.
LTE3311 Series User's Guide
63