Wall Mounting - ZyXEL Communications LTE3311 series User Manual

Lte indoor iad
Hide thumbs Also See for LTE3311 series:
Table of Contents

Advertisement

Table 1 Front panel LEDs (continued)
LED
WLAN/WPS
Phone
USB

1.9 Wall Mounting

You may need screw anchors if mounting on a concrete or brick wall.
Table 2 Wall Mounting Information
Distance between holes
M4 Screws
Screw anchors (optional)
Select a position free of obstructions on a wall strong enough to hold the weight of the device.
1
Mark two holes on the wall at the appropriate distance apart for the screws.
2
Be careful to avoid damaging pipes or cables located inside the wall
when drilling holes for the screws.
If using screw anchors, drill two holes for the screw anchors into the wall. Push the anchors into the
3
full depth of the holes, then insert the screws into the anchors. Do not insert the screws all the way
in - leave a small gap of about 0.5 cm.
If not using screw anchors, use a screwdriver to insert the screws into the wall. Do not insert the
screws all the way in - leave a gap of about 0.5 cm.
Chapter 1 Introduction
COLOR
STATUS
DESCRIPTION
Green
On
The LTE3311 is ready and the 2.4GHz wireless LAN is on, but is
not sending/receiving data through the wireless LAN.
Blinking
The LTE3311 is sending/receiving data through the wireless
(slow)
LAN.
Blinking
The LTE3311 is negotiating a WPS connection with a wireless
(fast)
client.
Off
The wireless LAN is not ready or has failed or WPS is disabled.
Green
On
A SIP account is registered for the phone port.
Blinking
A telephone connected to the phone port has its receiver off of
the hook or there is an incoming call.
Orange
On
A SIP account is registered for the phone port and there is a
voice message in the corresponding SIP account.
Blinking
A telephone connected to the phone port has its receiver off of
the hook and there is a voice message in the corresponding SIP
account.
Off
The phone port does not have a SIP account registered.
Green
On
The LTE3311 has a USB device installed and the 3G connection
is up.
Blinking
The LTE3311 is sending/receiving data to/from the USB device
connected to it.
Off
There is no USB device installed or the LTE3311 does not detect
a USB connection.
LTE3311 Series User's Guide
11 cm
Two
Two
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents