ZyXEL Communications LTE3311 series User Manual page 24

Table 6 Navigation Panel (continued)
LINK TAB
NAT General
Port
Forwarding
Port Trigger
ALG
Dynamic Dynamic DNS Use this screen to set up dynamic DNS.
DNS
Routing Static Route
Dynamic
Routing
Interface Interface
Group
Group
Security
Firewall General
Services
Content Content Filter
Filter
IPv6 firewall Services
Application
Voice over IP General
Phone Book
Speed Dial
Phone Conf.
SIP Conf.
Voice over General
3G
Phone Book
Telephone
Conf.
Call Conf.
SMS SMS
NAS File Sharing
FTP
Management
Bandwidth General
Management
Advanced
UPnP UPnP
TR069 TR069
Chapter 2 Introducing the Web Configurator
FUNCTION
Use this screen to enable NAT.
Use this screen to configure servers behind the LTE3311 and forward
incoming service requests to the server(s) on your local network.
Use this screen to change your LTE3311's port triggering settings.
Use this screen to enable or disable SIP (VoIP) ALG (Application Layer
Gateway) in the LTE3311.
Use this screen to configure IP static routes.
Use this screen to enable and configure RIP on the LTE3311.
Use this screen to create a new interface group.
Use this screen to activate/deactivate the firewall.
This screen shows a summary of the firewall rules, and allows you to edit/
add a firewall rule.
Use this screen to restrict web features and designate a trusted computer.
You can also block certain web sites containing certain keywords in the
URL.
Use this screen to configure IPv6 firewall rules.
Use this screen to enable VoIP, NAT traversal and dialing plan on the
LTE3311.
Use this screen to manage your VoIP contact names and phone numbers.
Use this screen to set up shortcuts for dialing frequently-used (VoIP) phone
numbers.
Use this screen to configure call features.
Use this screen to set up information about your SIP account, and
configure the SIP server information.
Use this screen to enable Vo3G on the LTE3311.
Use this screen to manage your Vo3G contact names and phone numbers.
Use this screen to configure call features.
Use this screen to maintain rules for handling incoming calls.
Use this screen to send new messages and view messages received on the
LTE3311.
Use this screen to allow file sharing via the LTE3311 using Windows
Explorer, the workgroup name.
Use this screen to allow file sharing via the LTE3311 using FTP.
Use this screen to enable bandwidth management.
Use this screen to set the upstream bandwidth and edit a bandwidth
management rule.
Use this screen to enable UPnP on the LTE3311.
Use this screen to configure your LTE3311 to be managed by an ACS.
LTE3311 Series User's Guide
24