Account Screen; Edit A User Account - ZyXEL Communications LTE3311 series User Manual

The following table describes the labels in this screen.
Table 75 Maintenance > General
LABEL
System Name
Domain Name
Administrator
Inactivity Timer
Apply
Cancel

24.4 Account Screen

It is strongly recommended that you change your LTE3311's system password.
If you forget your LTE3311's password (or IP address), you will need to reset the device. See
Section 24.8 on page 169
Click Account > Account. The screen appears as shown.
Figure 112 Maintenance > Account
The following table describes the labels in this screen.
Table 76 Maintenance > Account
LABEL
#
User Name
Group
Modify

24.4.1 Edit a User Account

Use this screen to edit a users account. Click the Edit icon next to the user account you want to
configure. The screen shown next appears.
Chapter 24 Maintenance
DESCRIPTION
System Name is a unique name to identify the LTE3311 in an Ethernet network.
Enter the domain name you want to give to the LTE3311.
Type how many minutes a management session can be left idle before the session times
out. The default is 300 seconds. After it times out you have to log in with your password
again. Very long idle timeouts may have security risks. A value of "0" means a
management session never times out, no matter how long it has been left idle (not
recommended).
Click Apply to save your changes back to the LTE3311.
Click Cancel to begin configuring this screen afresh.
for details.
DESCRIPTION
This is the index number of the entry.
This field displays the name of the user.
This field displays the login account type of the user.
Click the Edit icon to edit this user account.
LTE3311 Series User's Guide
163