The instructions require that your hardware is connected (see the Quick Start Guide) and you are
logged into the Web Configurator through your LAN connection (see
Make sure the WIFI switch (at the back panel of the LTE3311) is set to ON.
1
Open the Configuration > Network > Wireless LAN > General screen in the AP's Web
2
Configurator.
Confirm that the wireless LAN is enabled on the LTE3311.
3
Enter SSID_Example3 as the SSID and select Channel-06 as the channel. Set security mode to
4
WPA2-PSK and enter ThisismyWPA-PSKpre-sharedkey in the Pre-Shared Key field. Click
Apply.
Chapter 4 Tutorials
LTE3311 Series User's Guide
37
Section 2.2 on page
19).