Pin Settings - ZyXEL Communications NR2301 User Manual

Figure 52 APP MODULE > Messages: New Messages
The following table describes the labels in this screen.
Table 42 APP MODULE > Messages: New Messages
LABEL
Recipients
Content
Flash SMS
Send
Save to Drafts
Cancel

9.6 PIN Settings

Use the PIN Settings screens to enable PIN code authentication on the NR2301.
To access this screen, click APP MODULE > PIN Settings.
Chapter 9 Device Management
DESCRIPTION
Enter the phone number to which to send the message. Press Enter on your keyboard if you want
to add another phone number. You can add up to 5 phone numbers.
Enter the message content. You can send up to 160 characters in one message. If the message
exceeds 160 characters, more than one SMS will be sent.
If you want to display the message as a flash message for the receiver, select the checkbox.
Flash SMS is a special type of text message that displays immediately on the mobile phone
screen without the user having to take any action to read it.
Click this to send the message.
Click this to store the message as a draft.
Click this to cancel the message and return to the Messages screen.
NR2301 User's Guide
86