Codec Configuration - ZyXEL Communications LTE3311 series User Manual

Table 58 Application > Voice over IP > SIP Conf.: Service Domain Conf. (continued)
LABEL
Outbound Server
Outbound Proxy
Subscribe for MWI
Refresh Time for
MWI
MWI Server URI
Registration Status
Apply
Cancel
Back

17.7.2 Codec Configuration

Use this screen to maintain information about your SIP account, and configure the SIP server
information. To access this screen, click Application > Voice over IP > SIP Conf. and then click
the Codec Conf. button.
Figure 82 Application > Voice over IP > SIP Conf.: Codec Conf.
Chapter 17 Voice over IP
DESCRIPTION
Select Enable if your VoIP service provider has a SIP outbound server to handle voice
calls. This allows the LTE3311 to work with any type of NAT router and eliminates the
need for STUN or a SIP ALG. Turn off any SIP ALG on a NAT router in front of the
LTE3311 to keep it from re-translating the IP address (since this is already handled by
the outbound proxy server).
Enter the IP address or domain name of the SIP outbound proxy server.
Select Enable if you want to hear a waiting (beeping) dial tone on your phone when you
have at least one voice message. Your VoIP service provider must support the MWI
(Message Waiting Indication) feature.
Enter the number of seconds the SIP server should provide the message waiting service
each time the LTE3311 subscribes to the service. Before this time passes, the LTE3311
automatically subscribes again.
Enter the domain name of the MWI server.
This shows the current registration status of the SIP account.
Click this to save your changes and to apply them to the LTE3311.
Click this to set every field in this screen to its last-saved value.
Click this to return to the previous screen.
LTE3311 Series User's Guide
126