13) Seat; Rear Storage Compartment - Can-Am Outlander X mr Series Operator's Manual

CONTROLS/INSTRUMENTS/EQUIPMENT
vmo2013-007-007_a
TYPICAL
1. Latch
4. Close cover and verify if glove box is
locked in position.
vmo2013-007-005_a
TYPICAL
1. Glove box

13) Seat

Seat Removal
To remove the operator's seat, pull its
latch upward. This latch is located un-
derneath the rear of seat.
______________
82
vmo2014-009-001_a
TYPICAL
1. Seat latch
Pull seat upward then rearward. Con-
tinue lifting movement until you can
release the front retaining device then
completely remove seat.
Seat Installation
Insert front tabs of seat into steel
hooks of frame. When seat rests in
its position, firmly push seat down to
latch.
NOTE: A distinctive snap will be felt.
Double check that the seat is secure by
giving it a tug to confirm proper latch-
ing.
WARNING
It is of the upmost importance
for the operator's safety that you
confirm that the operator's seat
is properly locked in position by
pulling back and up several times.
14) Rear Storage
Compartment

Rear Storage Compartment (5 70

Models)
Convenient location to carry personal
articles.