Multifunction Gauge Modes - Can-Am Outlander X mr Series Operator's Manual

MULTIFUNCTION GAUGE (LCD) (570 MODELS)
5) 4WD Indicator Lamp
When this indicator is ON, it indicates
the 4WD system is activated.
6) Low Fuel Level Indicator Lamp
When this indicator is ON, it indi-
cates that there is approximately 5 L
(1.3 U.S. gal.) of fuel left in fuel tank.
7) Check Engine Indicator Lamp
When this indicator is ON, it indicates
an engine fault code, look for a mes-
sage at the LCD display.
When this indicator blinks, it indicates
that the LIMP HOME mode is acti-
vated.
TROUBLESHOOTING
Refer to
for more details.
8) High Beam Indicator Lamp
When this indicator is ON, it indicates
that high beam is selected on the
headlights and that ignition key is in
ON with lights position.
9) KM/H or MPH Indicator Lamp
The proper lamp turns on to indicate
the unit the speedometer uses.
______________
88
Multifunction Gauge
Modes
Speed Mode
In this mode, the main screen shows
the speed of the vehicle either in km/h
or in mph.
vdd2008-001-084
RPM Mode
In this mode, the main screen shows
the engine RPM.
section
vdd2008-001-089
Combined Mode
In this mode, the main screen shows
the speed of the vehicle and the engine
RPM.
vdd2008-001-085_a
1. Vehicle speed
2. Engine RPM
Odometer (OD)
Odometer records the total distance
travelled either in miles or kilometers.