Vehicle Care; Post-Operation Care; Vehicle Cleaning And Protection - Can-Am Outlander X mr Series Operator's Manual

VEHICLE CARE

Post-Operation Care

To preserve the vehicle and its com-
ponents, clean the vehicle with fresh
water as per the
AND PROTECTION
whenever the vehicle is used in the fol-
lowing conditions:
– Muddy conditions
– Salt-water environment.
NOTE: In salt-water environment, it is
also recommended to protect metallic
parts with XPS LUBE (P/N 293 600 016)
or an equivalent.
NOTICE
When reinstalling dash-
board over air filter housing, ensure
that all vent hoses are routed prop-
erly close to the air duct.
vmo2013-014-010_a
SUPPORT CONSOLE REMOVED FOR
CLARITY - 570, 650 AND 850 MODELS
1. Route vent hoses close to air duct
______________
142
VEHICLE CLEANING
recommendations
vmo2013-009-015_a
SUPPORT CONSOLE REMOVED FOR
CLARITY - 1000R MODEL
1. Route vent hoses close to air duct
Vehicle Cleaning and
Protection
Never use a high pressure washer to
clean the vehicle. USE LOW PRES-
SURE ONLY (like a garden hose).
High pressure can cause electrical or
mechanical damage.
Painted parts which are damaged
should be properly repainted to pre-
vent rust.
When required, wash the body with
warm water and soap (only use mild
detergent). Apply non-abrasive wax.
NOTICE
Never clean plastic parts
with strong detergent, degreasing
agent, paint thinner, acetone, etc.