Can-Am Outlander X mr Series Operator's Manual page 93

6. Choose hour second digit by press-
ing button.
7. Choose minutes first digit by press-
ing button.
8. Choose minutes second digit by
pressing button.
NOTE: The gauge will display the cur-
rent time for 10 seconds then will re-
turn to the normal display mode.
Unit Selection (km/h vs mph)
The speedometer, odometer and trip
meter are factory preset in miles but
it is possible to change them to kilo-
meter reading. Contact an authorized
Can-Am dealer.
Language Selection
The gauge display language can be
changed. Refer to an authorized
Can-Am dealer for language availability
and setup the gauge to your prefer-
ence.
While reading this Operator's Guide, remember that:
Indicates a potential hazard that, if not avoided, could result in serious
injury or death.
MULTIFUNCTION GAUGE (LCD) (570 MODELS)
WARNING
_______________
91