Table of Contents
Advertisement
3. Choose from these display options:
■
Set
Display Background
when there is no signal.
Set
■
Startup Screen
projector is warming up.
Set
■
A/V Mute
the
A/V Mute
4. When you're finished, press
Disabling the Projector's Buttons
When you enable the Control Panel Lock function, you can lock all of
the projector's buttons, or all of the buttons except the Ppower
button. The remote control can still be used to operate the projector.
1. Press the
button, highlight the
Menu
.
Enter
2. Select
Control Panel Lock
3. Select
(to lock all projector buttons) or
Full Lock
lock all buttons except the
4. Select
and press
Yes
5. Press the
button to exit.
Menu
To disable the Control Panel Lock function, select
Panel Lock menu. Or press and hold the
projector's control panel for 7 seconds. A message is displayed and the
lock is released.
to
to display your image
Logo
to
to display your image when the
On
to
to display your image when you press
Logo
button.
to exit.
Menu
Settings
and press the
button) and press
Power
to confirm the setting.
Enter
Enter
menu, and press
button.
Enter
(to
Partial Lock
.
Enter
in the Control
Off
button on the
Fine-Tuning the Projector
note
You can lock these settings to
prevent them from being
changed without a password
(see page 73).
77
Advertisement
Table of Contents
