note
If you mount the projector
on the ceiling, the interface
and button names on the
projector will appear upside
down. Attach the interface
label stickers so that you can
more easily read the names.
Setting Up the Projector
12
Unpacking the Projector
After unpacking the projector, make sure you have all these parts:
Projector and lens cap
Cable cover
Power cord
Save all packaging in case you need to ship the projector. Always use
the original packaging (or the equivalent) when you need to send the
projector to another location. If you are moving the projector by
hand, use the projector handle. See page 93 for transportation
instructions.
Additional Components
Depending on how you plan to use the projector, you may need
additional components:
To receive an HDMI signal from your video device, you'll need
■
an HDMI cable. One may be provided with your video
equipment.
■
To receive a DVI-D video signal from your video device, you'll
need a DVI/HDMI conversion cable.
PDF manuals and
registration CD-ROM
Remote control and
2 AA batteries
VGA computer cable
Password Protected
sticker
Lens theft
deterrent screw
Interface label stickers