Table of Contents
Advertisement
Playing Sound Through the Projector
You can play sound through the projector's speaker system or attach
an external speaker system.
To play sound through the projector, follow these steps:
1. Locate the appropriate cable and connect it to the appropriate
jack on the projector, as described below.
If you have equipment connected to the
■
use a stereo mini-jack cable. Connect the cable to the
port.
■
If you have equipment connected to the
use a stereo mini-jack cable. Connect the cable to the
port.
port,
Computer1
Audio1
port,
Computer2
Audio2
Setting Up the Projector
note
If you have equipment
connected to the
port,
HDMI
in most cases you do not
need to connect an
additional cable for sound.
You can, however, connect
an audio cable to the
,
, or
Audio1
Audio2
port (as described
Audio3
in this section) and output
the sound by adjusting the
setting. See
Audio Input
page 71.
If you are using a
DVI/HDMI conversion
cable to connect your
DVI-D source through the
port, you will need to
HDMI
connect an additional audio
cable and adjust the
Audio
setting as described
Input
above.
27
Advertisement
Table of Contents
