Table of Contents
Advertisement
You cannot do the following while the split screen is active:
■
Use the projector's on-screen menus
■
Use the E-zoom feature
Change the aspect ratio of either image
■
Use the
■
User
■
Use the Help button (unless an error or warning is occurring)
Additionally, while you are using the split screen:
The audio from the source on the left side of the screen will
■
be output.
The
■
Color Mode
settings for the image on the left are applied to
Adjustment
the image on the right (all of the remaining settings in the
projector's
Image
the right side).
You cannot use the advanced
■
or
Progressive
■
The
Overscan
The screen will be blue for any side which is not receiving a
■
signal, and the screen will turn black when the
button is pressed.
■
The image on the left side of the screen can be output to an
external monitor as long as it meets the requirements (see
page 26).
You can also activate the split screen using the projector's
menu. See page 71 for details.
button on the remote control
,
Abs. Color Temp
menu are set to default for the image on
Sharpness
features.
Noise Reduction
setting is set to its default value, if applicable.
, and
Color
settings or the
A/V Mute
Signal
Displaying and Adjusting the Image
41
Advertisement
Table of Contents
