Checking The Projector Id; Setting The Remote Control Id - Epson PowerLite Pro G5900 User Manual

note
When the remote control ID
switch is in the position,
Off
you can control any
projector regardless of the
projector or remote control
ID settings.
Presenting With the Remote Control
50

Checking the Projector ID

You can check the projector's ID by following these steps:
1. Move the remote control ID switch to the
2. Point the remote control at the projector you want to check.
3. While holding the
message on the screen like this:

Setting the Remote Control ID

The remote control's default ID is zero. This lets you operate any
projector. To set it to operate a specific projector, follow these steps:
1. Move the remote control ID switch to the
button, press the
ID Help
position.
On
button. You see a
position.
On