Table of Contents
Advertisement
note
If a critical problem develops
with a projector which
causes it to suddenly stop
working, it may not be
possible for the projector to
send a message.
If Standby Mode is set to
in
Communication On
the Extended menu, the
projector can still be
monitored even if the
projector is in standby mode
(when the power is off but
the projector is still
connected to power and the
network).
Using the Projector on a Network
58
6. Choose one of the
where you want to receive a message when a problem occurs.
You can register up to three addresses. You can enter up to 32
alphanumeric characters for the e-mail address.
7. Press
to exit.
Menu
When a problem or warning occurs, an e-mail message is sent to
the specified notification addresses. The subject line of the e-mail
is
EPSON Projector
information:
■
Line 1: The name of the projector where the problem has
occurred
■
Line 2: The IP address of the projector where the problem has
occurred
■
Line 3: Details of the problem
8. When you're done making all necessary changes, select
select
Setup complete
want to save the changes. Press
fields, then enter the e-mail address
Address
. The e-mail includes the following
, and then select
Yes
to exit the menu system.
Menu
,
Return
to confirm that you
Advertisement
Table of Contents
