Table of Contents
Advertisement
7. When the message
appears, select
Yes
few moments. Do not use your projector, remote control, or
video source while the logo is being saved.
8. When you see the message
Choosing When to Display the Image
After your image is saved, you can set it to display as the startup
screen, the screen you see when there's no signal, or the screen you see
when you press the
A/V Mute
1. Press the
button, highlight the
Menu
.
Enter
2. Select
and press
Display
3. Choose from these display options:
■
Set
Display Background
when there is no signal.
■
Set
Startup Screen
projector is warming up.
■
Set
A/V Mute
the
A/V Mute
4. When you're finished, press
Disabling the Projector's Buttons
When you enable the Control Panel Lock function, you can lock all of
the projector's buttons, or all of the buttons except the Ppower
button. The remote control can still be used to operate the projector.
1. Press the
button, highlight the
Menu
.
Enter
2. Select
Control Panel Lock
Save this image as the User's Logo?
and press
. Saving the logo may take a
Enter
, press
Completed
button (see page 58).
Extended
.
Enter
to
to display your image
Logo
to
to display your image when the
On
to
to display your image when you press
Logo
button.
to exit.
Menu
Settings
and press the
to exit.
Menu
menu, and press
menu, and press
button.
Enter
Fine-Tuning the Projector
note
You can lock these settings to
prevent them from being
changed without a password
(see page 78).
81
Advertisement
Table of Contents
