5. Choose
Wired LAN
screen:
6. Do one of the following:
■
If your network assigns addresses automatically, turn on the
setting.
DHCP
■
If your network does not assign addresses automatically, turn
off
and enter the projector's
DHCP
, and
Mask
Gateway Address
To enter numbers, use the
control to highlight the number you want to input, then press
the
button.
Enter
7. Press
to exit.
Menu
and press
. You see the following
Enter
IP Address
.
pointer button on the remote
,
Subnet
Using the Projector on a Network
55