Projecting Two Images Simultaneously - Epson PowerLite Pro G5900 User Manual

note
In order to use the Split
Screen feature, one of your
images must be input
through the port.
HDMI
Displaying and Adjusting the Image
40

Projecting Two Images Simultaneously

You can use the projector's split screen feature to divide the screen
into left and right sections and simultaneously project two images.
Follow these steps to activate the split screen:
1. Press the button on the remote control. The currently
Split
selected input source will move to the left side of the screen.
2. Press the button. You see the following screen:
Menu
3. To change one of the images, highlight either
(whichever side contains the image you want to
Source Right
change) and press
want to change to and press
4. To switch the images, highlight
5. To change one of the image sizes, highlight
press . Then highlight a sizing option and press
Enter
Press to exit.
Menu
Depending on the video signals that are input, the images on the
left and right may not appear at the same size even if you choose
as the sizing option.
Equal
6. To end the split screen, do one of the following:
■ Press the button on the remote control or the projector's
Esc
control panel.
Press the
■ Split
■ Select
Exit Split Screen
and press
Enter
. Then highlight the input source you
Enter
again.
Enter
Swap Screens
button on the remote control.
from the Split Screen Setup window
.
or
Source Left
and press .
Enter
and
Screen Size
again.
Enter