Epson PowerLite Pro G5900 User Manual page 37

4. Select
Quick Corner
You see this screen:
5. Use the pointer button on the remote control (or the arrow
buttons on the projector) to select the corner you want to adjust,
and press .
Enter
6. Use the pointer button on the remote control (or the arrow
buttons on the projector) to adjust the shape, then press
you are finished.
7. Repeat steps 5 and 6 as needed to adjust the other corners.
8. When you're done, press
Using Keystone Correction
You can manually adjust the shape of the image to compensate for
vertical and horizontal keystone distortion.
Before performing horizontal or vertical keystone, use the lens shift
function to horizontally center the lens and vertically move the lens to
the top or bottom (see page 35); otherwise, the distortion will not be
corrected accurately. Also, the distortion may not be corrected
accurately for some zoom settings.
1. Press the button on the remote control or projector.
Menu
2. Select the
Settings
3. From the Settings menu, select
and press twice.
Enter
to exit.
Esc
menu and press .
Enter
Keystone
when
Esc
and press .
Enter
Displaying and Adjusting the Image
note
To undo your Quick Corner
adjustments, press and hold
the button for about 2
Esc
seconds, select
Reset Quick
from the screen that
Corner
appears, then press .
Enter
note
Epson recommends using
Quick Corner to accurately
adjust keystone distortion.
See page 36.
note
You can also use the
projector's arrow buttons to
perform keystone correction
as long as the projector's
Keystone setting is set to
.
H/V-Keystone
37