Notices
124
■
Do not use sprays containing flammable gas to clean the lens or filter.
Do not spray a liquid of any kind directly on the projector or its lens. Do
not use the projector where there may be flammable, explosive, or
corrosive gases present in the atmosphere.
■
Do not place containers of liquid on top of the projector. Never spill
liquid of any kind into the projector.
■
Do not use the projector where it may be exposed to smoke, steam, or
excessive dust.
■
Never insert or drop objects of any kind through the projector's vents or
openings. Do not leave metal, flammable, or foreign objects nearby.
■
Do not use or store the projector or remote control in a hot location,
such as near a heater, in direct sunlight, or in a closed vehicle.
■
Do not block the slots and openings in the projector case. They provide
ventilation and prevent the projector from overheating. Do not operate
the projector on a sofa, rug, or other soft surface. If you are setting up
the projector near a wall, leave at least 7.9 inches (20 cm) of space
between the wall and the air exhaust vent.
■
Do not operate the projector in a closed-in cabinet unless proper
ventilation is provided.
■
If you are using two or more projectors side-by-side, leave at least 2 feet
(60 cm) of space between the projectors to allow for proper ventilation.
■
You may need to clean the air filter and vent. A clogged air filter or vent
can block ventilation needed to cool the projector.
■
Do not store the projector outdoors for an extended length of time.
■
Do not use the projector outside the required temperature range (see
page 119). Doing so may cause an unstable display and could lead to
projector damage.
■
Do not store the projector outside the required temperature range (see
page 119) or in direct sunlight for long periods of time. Doing so may
cause damage to the case.
■
Do not touch the plug during an electrical storm. Otherwise, you may
receive an electric shock.
■
Unplug the projector when it will not be used for extended periods.
Place the projector near an outlet where the plug can be easily
unplugged.
■
Remove the batteries from the remote control if you will not be using
the projector for a long period of time.