Rds/Rbds Settings Screen - DEVA Broadcast DB7000 Maintenance And Operating Instructions

Dsp-based fm radio re-broadcast receiver with tcp/ip connectivity

Hide thumbs Also See for DB7000:

Table of Contents

RDS/RBDS SETTINGS SCREEN

RDS Data Source:

•

Original – Original RDS/RBDS data received from the station;

•

Original/Local fallback – Upon loss of the original RDS/RBDS the local data will be used;

•

Replace with local – User-defined combination of the original and local RDS/RBDS data;

•

Local only – User-defined local RDS/RBDS data only.

When Replace with local RDS Data Source is chosen, the RDS/RBDS parameters could be

replaced with the specified in RDS Local Values section. Whether a parameter would be changed

to its local value on the fly, is specified in section RDS Replacement Rules.

RDS Local Values – RDS/RBDS Local Values are defined through this section.

AF Local Values – Set the total needed number of alternative frequencies and their value.

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: +359 56 820027, Fax: +359 56 836700

E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com

- 61 -

Table of Contents

Do you have a question about the DB7000 and is the answer not in the manual?