TP-Link TC-W7960 User Manual page 58

TC-W7960
Port Filtering:
 Add - You can add a new device for the Port Filtering rule by clicking
Delete - You can click

 Start/End Port - Display the start port/end port that cannot access this router.
Protocol - The protocol used for this application, either TCP, UDP, or BOTH (all protocols

supported by the modem router).
Enable - Click the

will become .
Modify - If you want to delete this entry, you can click the

To add an IP Address Filtering entry:
1. Click button, then you will see a setting page.
2. Enter the Start Port and the End Port.
3. Select the Protocol which you want.
4. Check Enable this Entry for this entry, as shown in the following figure.
300Mbps Wireless N DOCSIS 3.0 Cable Modem Router User Guide
Figure 5-30
button to delete the selected entries.
icon to enable the function. If this function has taken effect, the icon
51
button.
icon.