Activating The Modem Router - TP-Link TC-W7960 User Manual

TC-W7960
Step 2: Wait for about 1 minute until the following LEDs are solid on.

Note:
1. Keep the power on at all times during this process.
2. If the Internet LED
3. If the wireless LED
then check the LEDs again.
Step 3: Connect your computer to the modem router via a wired or wireless connection.
Wired: Connect the computer to the modem router's LAN port via an Ethernet cable.
Wireless: On your computer, select and connect to the modem router's wireless network.
The default wireless network name (SSID) and password are on the provided
Information Card.
Or you can set up a connection via the WPS button
panel of the modem router. If your computer use an adapter that supports
WPS, press the WPS button on the adapter. Within 2 minutes, press the WPS
button on the modem router until the WPS LED
WPS LED
established, then turns off.

2.4 Activating the Modem Router

Step 1. Get your Internet service account information and the modem router's Information Card
ready for activating your modem router. To access the Internet, the modem router needs
to be activated.
Step 2. If your computer is configured with a fixed IP, change it to "obtain an IP address
dynamically".
Launch a web browser, and visit any website. You will be automatically redirected to your
service provider's self-activation page.
Follow the on-screen self-activation instructions to activate the modem router. If the
self-activation page does not show up, please call your service provider's customer
service to activate the modem router.
300Mbps Wireless N DOCSIS 3.0 Cable Modem Router User Guide
is blinking or off, please call your ISP's customer service.
is off, please press the WiFi button
will stay on for 5 minutes when a WPS connection is
Figure 2-2
7
on the front panel,
, which is on the front
starts to flash quickly. The