Powering Up the Terminal
1. After installing the terminal, power up the system by pressing the Power
Switch, which is located at the bottom of the display.
The system installs the system devices, system settings, and then reboots to
continue setup.
2. Complete the System Setup. This varies depending on the operating
system, but the following is typical:
Starting Windows
l
Preparing the computer for first time
l
Checking video performance
l
3. Accept the License Terms Agreement.
Note
Depending on the installed operating system and the selected settings,
the time it takes to boot up varies.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
Confidential and proprietary information of NCR.
26