Power Up Procedures - HP 9000 A-180 User Manual

A-Class Server Installation
A-Class Server Power Up and Boot Procedures
A-Class Server Power Up and Boot Procedures
Overview
This Section discusses the following power up and boot procedures:
"Power Up All External Devices"
"Power Up the Server"
"Configuring the integrated A-Class Web Console". This procedure includes:
"Configuring The Web Browser Host"
"Configure the Web Browser"
"Configure The integrated A-Class Web Console Software"
"Accessing the Secure Web Console"
Optional procedures for identifying external devices and mapping diagnostics:
"Boot to Initial System Loader (ISL) (Optional)"
"Run Online Diagnostic Environment (ODE) Mapper (Optional)"
The command to "Boot HP-UX" after running either of the preceding options is also
included.

Power Up Procedures

Power Up All External Devices
Apply power to all external devices, such as additional disk drives, Universal Power
Supply, and Digital Data Storage. Observe that each device passes its own selftest
and is ready for operation. Refer to the device-specific documentation as necessary.
52 Chapter 2