Table of Contents
Advertisement
follow this precaution may result in personal injury or damage to components.
Step 2. Carefully open the carton, remove the contents, and set them on the work surface.
Each carton will contain:
o The server.
o An accessory kit.
o A packet containing installation instructions and regulatory information.
NOTE
Report any missing items to your local Hewlett-Packard office immediately. If there
is obvious freight damage, contact your shipper immediately.
We recommend that you retain all packing materials in case any of the items
received require return to Hewlett-Packard.
Unpack the Server
CAUTION
Do not set the server on its side, or in any position other than upright on its rubber
"feet," for operation. Failure to observe this precaution may result in component
damage or loss of system reliability.
Carefully unwrap the server and set it upright on the work surface.
Open the Accessory Kit
Open the Accessory Kit and verify that the contents agree with the packing list.
NOTE
Plastic Front Anchor Bracket end caps are included in each kit. Do not discard them.
They will be needed if the server is installed in a cabinet.
Chapter 2
Stand-Alone A-Class Server Unpack and Install Instructions
A-Class Server Installation
25
Advertisement
Table of Contents
