Table of Contents
Advertisement
isolated, it may be replaced individually with a board of the same size. For
example, a 128MB board must be replaced with another 128MB board.
•
Memory is installed in the following increments:
128MB (two 64MB RAM boards)
256MB (two 128MB RAM boards)
512MB (two 256MB RAM boards).
•
The smallest RAM pair must be installed in the lowest numbered slots, followed
by the next larger pair in the next two slots until all slots are filled. Memory slots
are configured in the order shown below:
0 B
A
1 B
A
2 B
A
3 B
A
•
If a memory pair is to be installed that is larger than the largest RAM pair of the
existing configuration: remove, reorder, and reinstall all pairs according to the
rules listed above.
Chapter 3
A-Class Server RAM Removal and Replacement
A-Class System Service
99
Advertisement
Table of Contents
