Table of Contents
Advertisement
A-Class Server Installation
Cabinet-Mounted A-Class Server System Unpack and Install
Connect External Small Computer System Interface (SCSI) Devices
Connect external SCSI devices to the Single Ended SCSI bus (labeled SCSI
(Single-Ended) 8/16/5) on the system card or to additional SCSI interface cards. If
external devices will not be connected to the SCSI bus, make sure the terminator
(1252-3932) is in place.
Make sure all devices on the SCSI bus have a unique address and the last device is
terminated. Refer to the documentation accompanying each device to learn how to
set addresses and where to place terminators.
Connect external DDS (Digital Data Storage) tape and DVD/ CDROM drives to
A-Class servers as shown in the diagram below. Connecting these devices in this
manner reduces the likelihood of excessive parity errors and unexpected interrupts
40
Chapter 2
Advertisement
Table of Contents
