HP 9000 A-180 User Manual page 36

A-Class Server Installation
Cabinet-Mounted A-Class Server System Unpack and Install
o Place the anti-static bag over the cabinet.
o Place bezel support packing on the front corners of the cabinet. Secure it with a
wrap.
o Place the top cap packing material and loading/unloading ramp on top of the
cabinet.
o Wrap the clam shell box around the cabinet.
o Put the box top on the box and secure the assembly to the pallet.
Be sure to follow the tagging and labeling instructions mentioned earlier. The
cabinet is now ready for shipment.
Installing a Stand-alone System in an HP-supported Cabinet
Cabinet Identification
The following cabinets can hold multiple A-Class servers:
Cabinet Product Assembled
Number by:
A4900A Factory
A4901A Factory
A4902A Factory
J1502A Field
J1501A Field
J1500A Field
C2785A Field
C2786A Field
C2787A Field
Cabinet Loading Requirements
A-Class servers require two EIA of cabinet space (each two EIA of space is
equivalent to the height of a server without the server's "feet"). Ensure that the
cabinet has this amount of space available.
36
Size (Height Maximum
x Width) Servers
1.25m x 19" 12
1.6m x 19" 16
2.0m x 19" 20
1.25m x 19" 12
1.6m x 19" 16
2.0m x 19" 20
1.1m x 19" 10
1.6m x 19" 16
2.0m x 19" 20
Adapter Kit
Number
A5180A
A5180A
A5180A
A5214A
A5214A
A5214A
A5214A
A5214A
A5214A
Chapter 2