Installing The Receiver - Seagull Models AT-6 TEXAN Assembly Manual

AT-6 TEXAN _
CODE SEA 76
20
.
M2 x 6mm.
Instruction Manual.
C/A glue.
Air tank.

INSTALLING THE RECEIVER.

1) Plug the seven servo leads and the
switch lead into the receiver. Plug the battery
pack lead into the switch also.
2) Wrap the receiver and battery pack in
the protective foam rubber to protect them
from vibration.
3) Route the antenna in the antenna tube
inside the fuselage and secure it to the bot-
tom of fuselage using a plastic tape.