Fax/Answering Machine Auto Switch Reception - Kyocera ECOSYS M6530cdn Operation Manual

Using Convenient Fax Functions > Using a Connected Telephone

FAX/Answering Machine Auto Switch Reception

This method is convenient when using both the answering machine and fax. When fax originals have been sent, the
machine receives them automatically, and when the call is from a telephone, the machine follows the functions of the
connected answering machine. Therefore, when the user is absent, the other party can leave a message on the
answering machine.
IMPORTANT
When using FAX/Answering Machine Auto Switch Reception function, if a silence
continues for at least 30 seconds before one minute passes after the machine has
received a call from the other party, the machine's silence detection function comes
into operation and the machine switches to fax reception.
NOTE
In order to use FAX/Answering Machine Auto Switch Reception, it is necessary to connect
an answering machine-equipped telephone set (commercially available product) to the
machine.
For details, such as responding to messages, refer to the Operation Guide of each
answering machine.
Set the number of rings to be made by the machine more than the number of rings to be
made by the answering machine.
Rings(TAD) (page 8-7)
Flow of reception
FAX
When the other party has sent
originals with automatic send
Receive fax originals from the
other party automatically (FAX
Automatic Reception).
Preparation:
Select [Auto (TAD)].
FAX (page 8-6)
FAX
When the other party has sent
originals with manual send
The answering machine plays the message informing the other
party that the user is absent.
The answering machine records a message from the other party.
When the other party starts
sending originals, the machine
receives the originals being
sent.
5-27
Telephone
When the other party is calling
from a telephone