Broadcast Transmission - Kyocera ECOSYS M6530cdn Operation Manual

Sending Faxes > Methods For Entering the Destination

Broadcast Transmission

This function allows you to send the same originals to several destinations in one operation. The machine stores
(memorizes) originals to send in memory temporarily, and automatically repeats dialing and transmission to the
set destination afterwards.
NOTE
When using a group for the destination, you can send originals to up to 100 destinations in one operation.
You can use this function together with sub address communication and delayed transmission.
When direct transmission has been selected, it changes to memory transmission at the time of transmission.
1
2
Select the [FAX] key.
Specify the destination.
Enter the fax number
NOTE
If Dest. Entry(FAX) is set to [Prohibit], it is not possible to directly enter a fax number. Select
the destination from the Address Book or the One Touch Key.
Dest. Entry(FAX) (page 8-9)
1
Enter the fax number of the receiving system.
NOTE
Up to 64 digits can be entered.
Use the numeric keys to enter a number.
Key
[Address Recall/ Selecting the [Address Recall/Pause] key adds about three seconds of
Pause] key waiting time during dialing. For example, when dialing the receiving system
on an external line, you can use this method to insert a pause before
resuming dialing after you dial a specific number.
2
Select the [OK] key.
Another fax number can be entered.
NOTE
When On is selected in Check New Dest., a confirmation screen is displayed for the
entered FAX number. Re-enter the same FAX number and select [OK].
Machine's Operation Guide
Description
3-12