Kyocera ECOSYS M6530cdn Operation Manual page 85

Using Convenient Fax Functions > Polling Communication
Using Polling Reception
1
2
3
4
Using Polling Reception with Sub Addresses
For polling reception, enter the sub address (on this machine, sub address and sub address password) set at the
sending machine. This communication is still possible when the other party is using a third-party machine provided it is
equipped with the same type of sub address communication function.
1
2
3
NOTE
When the other party is using sub addresses, refer to Using Polling Reception with Sub
Addresses below.
Select the [FAX] key.
Turn on polling reception.
[Function Menu] key > [▲] [▼] key > [FAX RX Polling] > [OK] key > [▲] [▼] key > [On] >
[OK] key
Specifying destination.
Methods For Entering the Destination (page 3-8)
Press the [Start] key.
The operations for reception begin.
NOTE
When On is selected in Check beforeSend, a confirmation screen is displayed for the
entered FAX number.
Confirmation Screen of Destinations (page 7-11)
IMPORTANT
Check the sub address set by the sender beforehand.
Select the [FAX] key.
Turn on polling reception.
To turn on polling reception, refer to the following:
Polling Reception (page 5-17)
Select the destination, and entering the sub address.
For the procedure for setting a sub address, refer to the following:
Sub Address Transmission (page 5-14)
For the procedure for selecting a destination, refer to the following:
Methods For Entering the Destination (page 3-8)
NOTE
You can select destinations using a combination of numeric keys input, One Touch Key
selection and selection from the Address Book containing registered sub addresses.
5-18