Receiving Faxes > Manual Reception
Manual Reception
This method allows you to receive faxes by selecting [On hook] key after confirming that the telephone line has
connected to the sending system.
NOTE
To use Manual Reception, you need to change the receiving mode to Manual Reception. To change to manual mode,
refer to the following:
FAX (page 8-6)
Connecting a telephone set (commercially available product) to this machine enables you to receive originals after
talking to the person at the sending system.
Flow of reception
1
2
3
The machine receives a call.
When the machine receives a call, it rings.
Select the [On Hook] key.
Select the [On Hook] key to establish the connection.
Select [Manual RX].
Reception will start.
4-4