B5P Autopilot Schematic - Beechcraft TRAVEL AIR 95 Shop Manual

Insert opposite Page 3-31.
Amendment 11
a.
Remove the glareshield and/or
radio
panel to provide
access to
the back side of the turn and
slip
indicator.
b.
Remove the plug
on the upper
side
of
the
orifice and
install
a
test gage
(0-5
inches Hg.).
c. Loosen the check nut and adjust the turn and
slip
orifice to 2.2 inches
of
Hg.
with
the engines operating at 2200
rpm.
Rotate
the adjusting
screw
counterclockwise
to increase the pressure and clockwise to decrease
the
pressure.
d.
Tighten the check nut,
remove
the test gage
and
reinstall the plug in the orifice.
e.
Reinstall the glareshield and/or radio panel.
EVT.
GYRO
TEST GAGE
PRESSURE
MANIFOLD
AUTOPILOT
MASTER
VALVE
B-5P Autopilot
Schematic
Page 4 of 4
Issued: February, 1969