Yaesu FTM-100DR Instruction Manual page 67

5
Press .
You can change how your own station's position information is displayed.
This function masks the lower digits of the position information (latitude, longitude)
when you do not want your own station position information to be known.
Pressing
"OFF", "1 digit", "2 digits", "3 digits", "4 digits"
OFF: The accurate position information of your own station will be transmitted
without being masked.
1 digit: The position information will appear with the lower 1 digit onwards masked
from the "OFF" value.
2 digits: The position information will appear with the lower 2 digits onwards masked
from the "OFF" value.
3 digits: The position information will appear with the lower 3 digits onwards masked
from the "OFF" value.
4 digits: The position information will appear with the lower 4 digits onwards masked
from the "OFF" value.
Example: Masking your own station position with a latitude of 35°37.23' and a
longitude of 139°45.02'.
OFF
35°37.23' 35°37.2
139°45.02' 139°45.0
Tip
Factory shipping value: OFF
6
Turn the DIAL and select [2 SPEED/COURSE].
7
Press .
Pressing
ON: Information on the speed and movement
direction are transmitted.
OFF: Information on the speed and movement direction are not transmitted.
Tip
Factory default value: ON
8
Turn the DIAL and select [3 ALTITUDE].
9
Press .
Pressing
ON: The altitude information is transmitted.
OFF: The altitude information is not transmitted.
Tip Factory default value: ON
10
Press for one second or longer.
The transmission information when sending a beacon will be set and the display will
return to the previous screen.
switches between the options in the following order.
1digit 2digits
35°37.
139°45.
turns this function ON and OFF.
turns this function ON and OFF.
Using the APRS set-up menu
3digits 4digits
35°3 . 35° .
139°4 . 139° .
66