Download Print this page

Yaesu FT2DR Instruction Manual: Registering A Standard Message

Hide thumbs

Advertisement

Sending MESSAGE and PICT (Image) Data
Displays the entire message.
6
To add letters to the message, input letters following steps 6 to 7 in "Creating and
Sending a New Message" on page 15.

Registering a standard message

Up to 10 texts containing a maximum of 16 characters each can be registered as
standard messages.
Registered texts can be selected and used like the 19 standard messages that have
been prepared in advance.
1
Follow steps 1 to 7 in "Creating and Sending a New Message" on page 15 to input a
text message.
Tip
• Alphanumeric characters including symbols can be used.
2
Touch [SAVE].
Displays the standard message list.
Tip
• Touch the
registered 19 standard messages.
3
Rotate the DIAL to select the number where you want to
register the standard message.
Tip
• You can select a number from "M01" to "M10".
4
Touch [SAVE].
Registers the text as a standard message and displays
the message entry screen.
Tips
• If you register a new message to a number where a
message already have registered, the old message is
overwritten.
• To cancel registration, press the
icon to select the desired message from the
key.
18

Advertisement

   Related Manuals for Yaesu FT2DR

Comments to this Manuals

Symbols: 0
Latest comments: