Yaesu FTM-100DR Instruction Manual page 19

● Example of a beacon information display for a fixed P (Position) station
The following information is displayed when a FIXED station or a fixed station is received,
or when the list on the "STATION LIST" screen is selected and
Tip
The Position may include detailed information called a PHG code. The data at this time is displayed
as shown below.
➀ Distance
➁ Date
➂ Time
➃ Transmission output
➄ Height of antenna from
ground
➅ Antenna gain
➆ Antenna orientation
➇ Number of transmissions This displays the number of transmissions of the partner station.
➈ Latitude
➉ Longitude
Comments
Turn the DIAL
Turn the DIAL
This displays the distance to the partner station.
This displays the date (MM/DD) the beacon was received.
This displays the time (HH:MM) the beacon was received.
This displays the partner station's transmission output.
This displays the height of the antenna from the ground.
This displays the gain of the partner station's antenna.
This displays the orientation of the partner station's antenna.
The current position of the partner station will be displayed in N
(northern latitude) or S (southern latitude).
(DD degree MM.MM minute or DD degree MM minute SS second)
The current position of the partner station will be displayed in E
(eastern longitude) or W (western longitude).
(DD degree MM.MM minute or DD degree MM minute SS second)
Comments, if any, from a partner station will be displayed.
18
Receiving APRS Beacons
is pressed.
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪