Yaesu FTM-100DR Instruction Manual page 32

4
Press [
5
Turn the DIAL and select [2 FILTER].
6
Press and select the condition for narrowing
down the list.
The condition for narrowing down the list changes
each time
The position comment can be select from among the following.
ALL
MOBILE
FREQUENCY
OBJECT/ITEM
DIGIPEATER
VoIP
WEATHER
YAESU
OTHER PACKET
CALL RINGER
RANGE RINGER
1200 bps
9600 bps
Tip Factory default value: ALL
7
Press for one second or longer.
The sorting conditions are set and the display returns to the "STATION LIST" screen.
8
Press [
Only the stations meeting the set conditions are displayed on the list.
].
is pressed.
All the received beacons will be displayed.
Only mobile stations will be displayed.
Only stations with frequency information will be displayed.
Only object stations/item stations will be displayed.
Only digipeater stations will be displayed.
Only VOIP stations such as WIRES stations will be displayed.
Only meteorological stations will be displayed.
Only stations using Yaesu wireless transceivers will be displayed.
Only RAW NMEA data station, status station, and packet information that
could not be analysed (non-APRS format) will be displayed.
Please set "7 OTHER" to ON under [10 APRS] → [3 APRS FILTER] in the
set-up menu to display non-APRS packets that cannot be analyzed.
Only stations whose call signs are set using [10 APRS] → [9 APRS
RINGER (CALL)] in the set-up menu are displayed.
Only stations that are close to the distance set using [10 APRS] → [8 APRS
RINGER] in the set-up menu are displayed.
Only stations received using 1200 bps (A12) packets are displayed.
Only stations received using 9600 bps (A96) packets are displayed.
].
Receiving APRS Beacons
31